| 000 | 02398nam a2200277 4500 | ||
|---|---|---|---|
| 008 | 250507t2018 |||ado|g m||| 00| 0 eng d | ||
| 040 |
_aUniversiti Teknologi Brunei _beng _cUTB |
||
| 084 |
_aRTDS 142 _aUTB 120 REPORT THESIS & DISSERTATION, RTDS 142 |
||
| 100 | 1 |
_aFatimah Nazirah binti Azmi _eauthor. |
|
| 245 | 1 | 0 |
_aDevelopment of a Process to Form Micrometer Scale Porous Polydimethylsiloxine / _cFatimah Nazirah binti Azmi |
| 260 |
_aBandar Seri Begawan : _bUniversiti Teknologi Brunei, _c©2018. |
||
| 300 |
_a103 pages : _bcoloured illustrations, tables, graphs ; _c30 cm . |
||
| 500 | _aA thesis submitted to The Universiti Teknologi Brunei (UTB) in partial fulfillment of the requirements for the degree of Master of Science (MSc) in Mechanical Engineering. | ||
| 500 | _aABSTRACT The aim of this research project is to a develop method to form a porous polydimethylsiloxane (p-PDMS) foams with one dimension having at least a few millimeters scale. There are currently five methods of making a p-PDMS. In this study, the p-PDMS will be fabricated using the curing templating methods also known as direct templating technique. In this project, the focus will be on fabrication process and characterization of a different porosity size. Four batches of samples were fabricated; dense PDMS, Small p-PDMS, Large p-PDMS and mixture of Small and Large p-PDMS. The use of organic plant as a mold was also investigated. Five types of tests were conducted to investigate mechanical properties and characteristic of p-PDMS sample of different porosity sizes. These 5 tests were compression test and compression test using the Instron 5565 UTM, oil absorption capacity test, recyclability test and microscope analysis to study the pore size using the Nikon SMZ-10A. In the characteristic test, 2 types of oil were used, petrol and diesel to find out the behavior for each p-PDMS sample react in case of oil spill. | ||
| 610 | 4 |
_zUniversiti Teknologi Brunei _yProject Report |
|
| 650 | 4 | _aThesis Writing. | |
| 650 | 4 | _aProject Report, Academic. | |
| 650 | 4 | _aProject Report Universiti Teknologi Brunei. | |
| 650 | 4 |
_aPolymers _xProcessing |
|
| 650 | 4 |
_aPolymers _xPorosity |
|
| 650 | 4 |
_aPolymers _xProcessing |
|
| 650 | 4 |
_aPolymers _xPorosity |
|
| 700 | 1 |
_cDr. Zuruzi Bin Abu Samah _esupervisor. |
|
| 942 |
_2lc _cRTDS |
||
| 998 |
_eBook _s904891 : 002411 c.1_UTB _xUniversiti Teknologi Brunei |
||
| 999 |
_c23309 _d23309 |
||