Development of a Process to Form Micrometer Scale Porous Polydimethylsiloxine /
Fatimah Nazirah binti Azmi
Development of a Process to Form Micrometer Scale Porous Polydimethylsiloxine / Fatimah Nazirah binti Azmi - Bandar Seri Begawan : Universiti Teknologi Brunei, ©2018. - 103 pages : coloured illustrations, tables, graphs ; 30 cm .
A thesis submitted to The Universiti Teknologi Brunei (UTB) in partial fulfillment of the requirements for the degree of Master of Science (MSc) in Mechanical Engineering. ABSTRACT
The aim of this research project is to a develop method to form a porous polydimethylsiloxane (p-PDMS) foams with one dimension having at least a few millimeters scale. There are currently five methods of making a p-PDMS. In this study, the p-PDMS will be fabricated using the curing templating methods also known as direct templating technique. In this project, the focus will be on fabrication process and characterization of a different porosity size. Four batches of samples were fabricated; dense PDMS, Small p-PDMS, Large p-PDMS and mixture of Small and Large p-PDMS. The use of organic plant as a mold was also investigated. Five types of tests were conducted to investigate mechanical properties and characteristic of p-PDMS sample of different porosity sizes. These 5 tests were compression test and compression test using the Instron 5565 UTM, oil absorption capacity test, recyclability test and microscope analysis to study the pore size using the Nikon SMZ-10A. In the characteristic test, 2 types of oil were used, petrol and diesel to find out the behavior for each p-PDMS sample react in case of oil spill.
--Universiti Teknologi Brunei--Project Report
Thesis Writing.
Project Report, Academic.
Project Report Universiti Teknologi Brunei.
Polymers--Processing
Polymers--Porosity
Polymers--Processing
Polymers--Porosity
Development of a Process to Form Micrometer Scale Porous Polydimethylsiloxine / Fatimah Nazirah binti Azmi - Bandar Seri Begawan : Universiti Teknologi Brunei, ©2018. - 103 pages : coloured illustrations, tables, graphs ; 30 cm .
A thesis submitted to The Universiti Teknologi Brunei (UTB) in partial fulfillment of the requirements for the degree of Master of Science (MSc) in Mechanical Engineering. ABSTRACT
The aim of this research project is to a develop method to form a porous polydimethylsiloxane (p-PDMS) foams with one dimension having at least a few millimeters scale. There are currently five methods of making a p-PDMS. In this study, the p-PDMS will be fabricated using the curing templating methods also known as direct templating technique. In this project, the focus will be on fabrication process and characterization of a different porosity size. Four batches of samples were fabricated; dense PDMS, Small p-PDMS, Large p-PDMS and mixture of Small and Large p-PDMS. The use of organic plant as a mold was also investigated. Five types of tests were conducted to investigate mechanical properties and characteristic of p-PDMS sample of different porosity sizes. These 5 tests were compression test and compression test using the Instron 5565 UTM, oil absorption capacity test, recyclability test and microscope analysis to study the pore size using the Nikon SMZ-10A. In the characteristic test, 2 types of oil were used, petrol and diesel to find out the behavior for each p-PDMS sample react in case of oil spill.
--Universiti Teknologi Brunei--Project Report
Thesis Writing.
Project Report, Academic.
Project Report Universiti Teknologi Brunei.
Polymers--Processing
Polymers--Porosity
Polymers--Processing
Polymers--Porosity